Rca scenium dvr manual

It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. This will only add delays in service for your product. TTE Technology, Inc.

Voyez la page Vous pouvez visionner ce que vous voulez, quand vous le voulez. Pour lire un programme figurant dans la liste, mettez en surbrillance Lecture et appuyez sur OK ou mettez en surbrillance un programme et appuyez sur PLAY. Lea las instrucciones — Se debe leer todas las normas de seguridad e instrucciones de funciona- miento antes de usar este dispositivo. Los dispositivos que usen interfaz IEEE se pueden conectar a cualquiera de los puertos.

Puede ver lo que desea ver, cuando desea verlo. This manual is also suitable for: Scenium dvr Print page 1 Print document 72 pages. Rename the bookmark. Lamp Power Lamp Replacement Instructions HDTV Specifications Accessory Information Limited Warranty Care and Cleaning FCC Information Arrange the components so that air can circulate freely.

Use soft or indirect lighting. If a stand, base, or cabinet is used, insure that it is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. The pictures below show the cables not supplied you may need for the connections represented in this book. There are several ways to connect your HDTV, depending on the components you want to connect and the quality of the signal you want to achieve.

Please use the following chart to determine which connection is best for you. Proceed to the appropriate page and connect your TV.

For more information about the relationship between the cables, jacks, and the quality of the signal you see on your TV, go to following page. Note for U. Customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation.

For details about this service, call For additional assistance while using your RCA Scenium product, please visit www. The front panel piece is removable to allow access to the jack panel, mirror adjustment screws, and lamp door. The mirror adjustment is discussed on page 59 and the lamp replacement is discussed on page To remove the front panel piece, grasp one end of the panel and pull out until the tab pops out of the hole.

Continue to slide your fingers down the panel as the tabs pop out of place, until it is unattached. Reattach the front panel piece by lining up the tabs with the holes, starting at the bottom.

Then push the tabs back into place. The jack panel is located towards the back of the TV. You can access these jacks from the front by removing the front panel piece as described above, or from the back by removing the jack panel door.

Locate the jack panel door on the back of the TV on the right bottom side. To remove the door, pull the tab towards the left, and then pull the door open. Reattach the jack panel door by fitting the tabs on the left into the slots and then close the door until it snaps into place. Connect the cables to the jacks by putting the cables through the hole, as shown to the left. Then the cables can be placed on the shelf at the back of the TV. The diagrams that follow illustrate jacks found towards the back of the TV.

When connecting cables, be sure to connect corresponding outputs and inputs video input into video out, right audio input into right audio out, etc. This section describes the jacks and cables you might use to make connections cables may be ordered separately by calling the number on page There are several ways to connect components to your TV. Different jacks and cables provide a different level of performance. You must leave the TV on the same channel you are recording.

Notes: When recording from this output, remember to tune to the channel you want to record. When using S-Video, make sure to connect the two audio cables as well as the S-Video connector. The S-Video jack provides better picture quality than the composite video jacks because the color chrominance, also called chroma part of the signal is separated from the black and white luminance part of the picture.

Go to the Connections menu, choose Video Input Setup and select which video input source you are using. To ensure maximum picture quality, use three video-grade cables for the. Y P B P R connections. Accepts i, p, p, and i signals. Go to page 64 for more information. Notes: Also, remember to connect the left and right audio cables because the Y, P B , P R cables carry only the picture signal, not the sound.

Do not connect a telephone cable because of risk of fire or shock. A green light on the jack means that an active network has been detected. An orange light on the jack means the data is either being sent or received. Dolby Digital offers theatre-quality sound six audio channels. If you own a receiver that uses an optical cable input, you can use an optical cable to connect the TV to that receiver for the best sound quality.

Older equipment, some of which is not fully compliant with IEC, may not be compatible with the Dolby Digital bitstream. Such a connection using anything other than a Dolby Digital AC-3 or PCM receiver or decoder could create a high noise level, causing damage to headphones or speakers.

This connection is a high-speed way of interconnecting compliant consumer electronic components. When connecting several components, use a hub or component-to-component method. Be sure to connect the fastest of the DTVLink components closer to the connection point of the TV and the slower components furthest away.

Details on page Notes: Audio and video information is carried on a single wire. CableCARD Allows you to use a digital cable television card to receive digital cable services, including premium and HDTV cable channels, without the need for a set-top box.

Also, connect the left and right audio cables to an input that is not in use. An example is shown on page Notes: The front panel illustration shows a typical front panel layout. The exact look may be different from the one on the front of your TV.

If you use the Front Button Block feature, the front panel no longer provides access to the menus. The Front Button Block feature disables all front panel buttons. For more information, see Chapter 3. Lamp door is open. Locate the lamp door on the front of the TV under the front panel piece and close it go to page 10 on instructions on removing the front panel piece. Turn off the TV and turn back on. The lamp should turn on. Lamp is dead. You can replace the lamp yourself following the instructions on page Go to page 82 for ordering information.

Lamp power supply within TV may need service. Go to page 84 for warranty information. CH Scans down through the channel list. In the menu system, it moves the highlight down and adjusts menu controls. CH Scans up through the current channel list. In the menu system, it moves the highlight up and adjusts menu controls.

VOL Decreases the volume. In the menu system, it moves the highlight left to items and adjusts menu controls. VOL Increases the volume. In the menu system, it moves the highlight right to items and adjusts menu controls. A few seconds after the last button press, the backlight turns off. Note: Pressing any front panel button also activates the backlight.

Power button Turns the TV on and off. The indicator lights when TV is on. If you try to turn the TV on during a cooldown, you will hear audio and then the picture will be displayed after a few moments. This could take up to one minute.

Power indicator See above for different light status of the indicator. The brightness of the light can be controlled in the Preferences menu. Go to page 70 for more information. Notes: If you are using an S-Video cable or component video cables, you must also connect audio cables.

The S-Video cable and component video cables only transfer video information. If your DVD player has a component video output, we recommend you use the component video input on the TV instead of the composite video or S-Video connection.

This enables recording of digital and analog programs except copy protected or component video formats. Turn on the TV and the component s you want to view. Press the TV button on the remote control. This is called Auto Tuning. See Chapter 3 for more information. Connect your Satellite Receiver to your TV. Note: If you are using an S-Video cable or component video cables, you must also use audio cables.

The component-to-component method is each component connected in a chain-like fashion, one to the other with the first component in the chain connected to the DTVLink jack on the TV. The hub method is basically the same but using both DTVLink jacks with two separate chains of components connected.

Your TV is a control center for the connected compatible components, automatically recognizing each component and placing it in the Input list: press the INPUT button until you see the component name in the channel banner at the top of the screen. Three types of connectors are available on DTVLink components; 4-pin connector no power ; 6-pin connector with power and 6-pin connector without power supplied.

Your DTVLink is a 6-pin connector without power supplied. Both the 4-pin and 6-pin connectors are capable of sending digital audio and video, and digital control signals back and forth between components. If you should have some components with 4-pin connectors, 4-to-6 pin adapter cables are available from your local electronic stores. That is, each component should have only one connection point to the TV, or the network might not work.

Go to page 65 for more information. High-Definition Multimedia Interface HDMI is an uncompressed digital interface that carries both video and audio data by way of an integrated mini-plug cable. Turn on the TV and the component you want to view. FCC Statement: This digital television is capable of receiving analog basic, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming.

A security card provided by your cable operator is required to view encrypted digital programming. For more information, call your local cable operator. The CableCARD slot allows you to use a digital cable television card to receive digital cable services, including premium and HDTV cable channels, without the need for a set-top box.

Please contact your local cable company for availability of services and to obtain a digital cable television card.

Then, turn on your TV. Push firmly on the card until almost the entire card is inserted. Wait to receive information on-screen regarding your digital cable television services. See below for information on setting up digital cable television services for your TV. In the case it needs to be removed, grasp firmly, and pull the card straight out.

Once you have connected a digital cable card to the CableCARD slot on the back of the TV explained above , you are ready to receive digital cable channels.

Digital subchannels, e. Note: If you have both Antenna and Cable channels, pr ess the. Engaging in a channel search tells the TV to search for all the TV channels. When the TV finds an active.

Inactive channels weak stations or. T o do a complete channel search, check each box that pertains to your TV. Input and press OK to place a checkmark in the box. Select Start to begin the. Notes: Channel Search with all options selected takes some time to. Main Menu Audio. Press 5 or 6 to point to an option, then press OK to. Press 3 to return to the menu. The TV ' s internal speakers can be used as a center speaker. T o do so, connect an external audio amplifier ' s center.

Then select the matching option from the list above. Warning: Connect from the audio amplifier ' s center. The center channel ouput from an audio receiver.